"Update Sevice"
Good to know. Thanks Eugene.
"Update Sevice"
Got it. The problem in your current project "Paulin Survey" at point with name "188". There is "0" in ReferenceTime instead of the real value. To be safe, I have edited this project's DataBase and now the point opens and doesn't make problems in Archiving. I set the ReferenceTime to vale of the point which should not be a right way, but at least you can fix this point manually(edit / delete ). Attached data.db should be unzipped and your current file(VS Data\Maps\Paulin Survey\data.db) replaced with this one. You need to download, unzip to USB flash, insert it into LS, exit from JField to Windows, Run File explorer and overwrite existing db file(better, backup existing one!). Good luck!
I was trying to import ypur projects into JField on Linux, but failed for all of them. Errors on unpacking. Also there are three projects were active, but 24 more are saved before. Probably on your device all willbe okay. You can migrate to Linux, but be aware that "Restore Data" process may fail on importing projects and Settings will not be applied in the end.
It is not different, just some projects have DATA.DB file in upper case instead of lower. But we expect on Linux only lower case. I have fixed this on Importing.Eugene, I will follow your instructions tomorrow morning and see how it goes. I don't understand why my unit and projects are so different and failed in your attempts.
Migration appears to be successful. Data is restored. Is it safe to remove thumb drive?
Does this mean that linux now accepts caps? Or, does it mean it changes it to lower case?It is not different, just some projects have DATA.DB file in upper case instead of lower. But we expect on Linux only lower case. I have fixed this on Importing.
It does mean that while importing any of saved Projects we check the DATA.DB for capital letters and rename it to data.db. So I think in your options it is the case (2). Linux file system drivers are case sensitive always.Does this mean that linux now accepts caps? Or, does it mean it changes it to lower case?
I think you have started first migration on the old version. Now to get more information about the current state of the unit, can you put it on RAMS server "JAVAD GNSS,INC", please?Process started last night, Software window now says 2.1.0.58. Ever since the first attempt to migrate to Linux the LS has been "Bogged" to the point of not worth using.
Just hold in power button to shut off?
Connected to RAMS and the Red Disconnect button is recording the time