OAF File Update

I have an OAF file that was emailed to me that I need to use to update my 1M. What is the best way to do this? I tried putting it on a flash drive, and transferring it into the LS so I could connect the two and update that way, but I was not able to get it off the flash drive once inserted into the LS.
 

Shawn Billings

Shawn Billings
5PLS
With the Triumph-LS connected to the internet, connect the LS to the Triumph-1M in Base Rover Setup by Bluetooth. Select the panel below Start Base that shows the base name and rover name. Select Update Options. The Triumph-LS will check the Javad server for the lastest OAF for the Triumph-1M and install it. The Triumph-1M will reboot, breaking the Bluetooth connection. At this point, the Triumph-1M should be updated. You can also update the receiver firmware and radio firmware on the Triumph-1M from this menu.
 
Thank you Shawn! It did exactly as you said and had installed what I assume is the OAF file. That file was so we could have access to the BeiDou satellites. We will see what happens once we go out into the field.
 

Shawn Billings

Shawn Billings
5PLS
See this thread for more information regarding settings you'll need to make:

 
Top