PDF Report from LS

pappassurveyor

Member
5PLS
I just noticed that the PDF report from the LS does not show what geoid was used. I have tried to see if it is a checkbox when creating the report but do not see where or why it is not reporting. attached is the first page of the report. I have looked through the entire report and to my knowledge the geoid used is not published anywhere. Thanks
Screenshot 2021-03-19 075455.jpg
 

Adam

Well-Known Member
5PLS
I just noticed that the PDF report from the LS does not show what geoid was used. I have tried to see if it is a checkbox when creating the report but do not see where or why it is not reporting. attached is the first page of the report. I have looked through the entire report and to my knowledge the geoid used is not published anywhere. Thanks View attachment 11012
Thats odd, on the older one I am looking at it shows the Geoid model file and the .bin file used directly below where it says Geoid. I looked at one I did a couple weeks ago and it looks like yours. No geoid
 

pappassurveyor

Member
5PLS
Thats odd, on the older one I am looking at it shows the Geoid model file and the .bin file used directly below where it says Geoid. I looked at one I did a couple weeks ago and it looks like yours. No geoid
I checked older reports (from previous versions of J-Field) and it published the Geoid it seems it is only with the latest version
 

James Suttles

Active Member
One other thing, I have noticed, is the fixed shows pending, how does the become final or what should it display? These points were from the NCRTN, so I am guessing that is why there is no BeiDou, Could the pending be from my variety score did not meet the required amount set in the profile?
pending.jpg
 
Last edited:

Adam

Well-Known Member
5PLS
I don't know what Pending means. It had rtk and an rtpk solution. I asked Doug to post it here hoping someone would know what it meant. It is the first time I've seen that designation.
 
Top