I am running J Field Pre Release 2.0.5.711. In the field yesterday I noticed the LS would have phantom clicks and random screen changes without and interaction from me. I was able to touch the screen and return to where I was at and complete my task. The screen seemed to be a little sluggish when this would occur but did not become unresponsive. I powered the unit off and rebooted, but that didn't fix the behavior. I then used the A/V button and calibrated the screen, this seemed to help and finished my field work. Later in the evening in the office with the LS on and setting on my desk it started to repeat the phantom clicks, sometimes changing the screen , then the next phantom click was audible only with no screen change. The unit appears to be working correctly in spite of the phantom clicks. Anyone else experienced this, or have any thoughts?
Phantom "clicks" on the LS
- Thread starter Steve Hankins
- Start date
Thanks!
Thank you sir, and thank you for the most awesome set of equipment I have had the pleasure of running in my 41 years of surveying. I am having the most fun I have ever had!
Thanks Steve. Your words keeps me going. Thanks again.
Nate The Surveyor
Well-Known Member
I have to second Steve's comments. It is the most awesome piece of surveying equipment, and a pleasure to run!
N
N