Report Variability

Mark Wheeler

Active Member
In the points record (from Edit points) could the variability of the point collection be added. This would be helpful.
Thanks,
Mark Wheeler
 

Vladimir Prasolov

Well-Known Member
JAVAD GNSS
Dear Mark,
What kind of variability you want. We already have HRMS and VRMS reported. We could add Interquartile Range IQR or other statistics. Please let us know what quantities could be useful.
 

Mark Wheeler

Active Member
Vladimir,
When collecting a point, the collect screen displays confidence, Consistancy and Variability ( based on number of independent fixes). I would like to be able to go back to this point in the Points screen/Edit (pencil)/additional information/ and have point collection variability displayed to the right of Consistency for later reference. At this time only Confidence, Consistency and Duration are displayed. Being able to come back and check this at a later time would be valuable.
Thank,
Mark
 

Adam Plumley

Active Member
JAVAD GNSS
Vladimir,
When collecting a point, the collect screen displays confidence, Consistancy and Variability ( based on number of independent fixes). I would like to be able to go back to this point in the Points screen/Edit (pencil)/additional information/ and have point collection variability displayed to the right of Consistency for later reference. At this time only Confidence, Consistency and Duration are displayed. Being able to come back and check this at a later time would be valuable.
Thank,
Mark
Mark, do you have screenshots for the points? They will show the variety at the end of the observation.
 

Mark Wheeler

Active Member
I don't generally take screen shots of the points. I would like Variability added to the screen mentioned above. This way I can go back after the fact and see whether it was one engine repeating the same fix or if multiple engines came up with the same solution.
 

Adam

Well-Known Member
5PLS
Screenshots are stored automatically if turned on under what to record in the action profile. You may actually have them. Highlight the point then look at the row of icons above the point data in the blue box. Tap on the screenshot icon and see if it shows it. I agree variety should be added to the point info used for the reports too.
 
Top