Rover Has No Compatible Radio

[Donald E Robinson]

I upgraded my T2 to the latest Firmware and was adjusting the settings in my LS for Galileo and BieDou and now I can't connect to the UHF Radio (HPT 404BT). I get a popup stating "Rover Has No Compatible Radio". I have tried all day to fix it, with no luck. Any ideas?
Don

 

[Donald E Robinson]

Update....The crew advise me that the error occured last Friday, so the Firmware udpdate was not the problem. But, I did update J-Field just before the crew went to the site. So, it appears that J-Field is the culprit.

 

[Nate The Surveyor]

Just aFYI...
Set up the base. Set up the radio, but, dont give it much time, and try to start things. It gives you this notification. Often, it will eventually turn GREEN, simply cause RADIO was not available, when you pressed start.
One thing you can do, is set up, and start the radio FIRST, then the base GPS, and you probably won't get the "Warning".
Just a long user of Javad.
BTW, I could use a firmware update. (Anybody listening?)
Nate

 

[Phillip Lancaster]

Update....The crew advise me that the error occured last Friday, so the Firmware udpdate was not the problem. But, I did update J-Field just before the crew went to the site. So, it appears that J-Field is the culprit.

I'll help you Don.

 

[John Rosco]

Update....The crew advise me that the error occured last Friday, so the Firmware udpdate was not the problem. But, I did update J-Field just before the crew went to the site. So, it appears that J-Field is the culprit.

See post - https://support.javad.com/index.php?threads/cannot-start-stream-error-on-my-ls.6138/#post-55604
and also - https://support.javad.com/index.php?threads/not-getting-corrections-stream.6122/#post-55506

 

[John Rosco]

I upgraded my T2 to the latest Firmware and was adjusting the settings in my LS for Galileo and BieDou and now I can't connect to the UHF Radio (HPT 404BT). I get a popup stating "Rover Has No Compatible Radio". I have tried all day to fix it, with no luck. Any ideas?
Don

The Triumph-2 does not have a 'radio' modem installed, unlike a Triumph-3 'base' or Triumph-1MP . . .

Upgrading the Triumph-2 firmware will reset all previous configurations to 'factory default' values (clear NVRAM).
Thus to use a T-2 'Remote Base' with UHF radio requires 'an external' HPT404BT to be re-configured & 'paired' (to the Triumph-2 'remote base' receiver) via Bluetooth . . .