Surveying in the wide open, no fix

Nate The Surveyor

Well-Known Member
Occasionally, I have been working in the deep dark woods, where rtk "don't go", and been at it for 1/2 a day. Then, I move out in the wide open. And, the LS just runs super slow. It takes 3 mins, to get 5 clicks. I'm wondering what's up with that. Is there some sort of reset I can do? It does not happen all the time, but, it does happen often enough, to make be think that maybe another kind of reset is desirable, when this happens.
Any ideas? Suggestions?
Thank you,
Nate
 
Happens to me all the time. Most recently using LS with RTN to topo a large field (50+ acres) and it sometimes took 3-5 min.s to get a quick topo shot!?? By the way I'm wondering if my system needs some type of "re-set" also. We routinely have to spend 1.5 to 2 hours to get a verified RTK location on a corner in moderate canopy...seems like with every update my system runs slower and is less reliable
 

Sean Joyce

Well-Known Member
I reboot (usually a soft reboot but sometimes a shutdown and restart) the L.S. , it seems to help when it gets bogged down and slow.
 

Shawn Billings

Shawn Billings
5PLS
Try updating your base firmware. You can do this through base rover setup on the Triumph LS when it is connected to the internet. Access the update application with the panel just below start base with the base and rover names.
 
Ok maybe tonight & tomorrow AM (EST) I can leave it on RAMS and get it checked out and make sure all is set up correctly
Thanks
 

Matt Johnson

Well-Known Member
5PLS
Occasionally, I have been working in the deep dark woods, where rtk "don't go", and been at it for 1/2 a day. Then, I move out in the wide open. And, the LS just runs super slow. It takes 3 mins, to get 5 clicks. I'm wondering what's up with that. Is there some sort of reset I can do? It does not happen all the time, but, it does happen often enough, to make be think that maybe another kind of reset is desirable, when this happens.
Any ideas? Suggestions?
Thank you,
Nate

You should share the raw data files so they can be investigated.
 
Top