T-2 mask and interval

[John Noonan]

When you wish just to collect data. Can you use NetView in the office to set the mask and interval in the T-2 prior to going in the field.

 

[Shawn Billings]

Yes. When connected via NetView to the Triumph-2, go to Parameters>Log-files then look under File A for Implicit Message Output Period to control recording interval and Mask Elevation for mask angle. When you make the changes you want, select Apply at the bottom of the screen and click refresh to make sure your changes were applied.

 

[John Noonan]

Yes. When connected via NetView to the Triumph-2, go to Parameters>Log-files then look under File A for Implicit Message Output Period to control recording interval and Mask Elevation for mask angle. When you make the changes you want, select Apply at the bottom of the screen and click refresh to make sure your changes were applied.

Thanks Shawn Afterwards when I go back to RTK do I need to reverse this setting

 

[Shawn Billings]

I don't believe so. Remind me John, how are you using the Triumph-2 for RTK? If it's a base, base rover setup will set it. The mask angle may stick, but recording interval will be determined by base rover setup.

 

[John Noonan]

What about the logging interval ie 1 second, 4 sec., 15 sec., or 30 sec. Can that be set?
I am using it stand alone.

 

[Shawn Billings]

Implicit message output is recording interval.

 

[John Noonan]

OK Thanks