T-LS RTN & Base Station ID

JBrinkworth

New Member
Hey folks,

I am doing a test with INDOT RTN. So far, I have been able to export the G-file vectors from the network observations successfully. I have quite a few redundant measurements to adjust.

From the raw data, how do you determine which CORS Base Station is being used by the LS? I need to establish a fixed station for the adjustment. I am running Star*Net v.8.

Thanks!
 

Shawn Billings

Shawn Billings
5PLS
What kind of mountpoint did you use? VRS or single baseline (nearest)?

VRS is a problem for vectors because the base station keeps changing to a point near your rover.
 

Matt Johnson

Well-Known Member
5PLS
In the points screen, if you scroll down the blue screen you can see the base station coordinates for each point:

1-PREPARE-COLLECT_20151118-18.06.07.png
 

JBrinkworth

New Member
Thanks everyone for the replies. I will try that suggestion Matt.

IN does refer to their network as VRS. But, according to the IN Land and Aerial Survey Office, the mountpoint is actually the nearest base station (not a virtual station).
 
Top