Donald E Robinson
Active Member
Since I have updated the Firmware, on the Triumph 2, I have not been able to collected any data. The JAVAD program on my tablet has also been updated recently.
Last Friday, I attempted to collect static data for 3 hours. After I set the parameters, using my tablet, I clicked on the Static button. I received a message that stated the height of the antenna was not set, but I had set the height. This always happens, so, I have to set it again. At this point, normally, I can proceed. This time small dialog box appeared stating something like "Unable to received data from receiver", even though I am connected via Bluetooth. I stopped and restarted the static session, but, I received the same error. I ignored it because the T2 appeared to be collecting data. I collected data for 3 hours. At the end of the day, I downloaded the file which was very small and processed it. It collected data for 2 minutes!
Before returning, yesterday, I downloaded the firmware again. This time I set up as usual and began the session. I did not receive any errors. The dialog box appeared "Starting Survey". I set the T2 to log data every 30 seconds. Everything appeared to be working normally, but, I noticed that there was no epoch count showing on the tablet screen, anywhere. It's been a while since I have collected static data, but, I thought, before the update, there was an area on the tablet screen that counted the epochs. Anyway, I collected data for another 3 hours and returned to the office only to find there was absolutely no file to download.
I don't know if the firmware changed the settings in the T2, but, it's a paperweight right now. Also, I don't know if it is the T2 or the recently update JAVAD program that is creating this problem.
Is there anyway to restore the settings to the previous firmware?
Thanks in advance for any help!
Last Friday, I attempted to collect static data for 3 hours. After I set the parameters, using my tablet, I clicked on the Static button. I received a message that stated the height of the antenna was not set, but I had set the height. This always happens, so, I have to set it again. At this point, normally, I can proceed. This time small dialog box appeared stating something like "Unable to received data from receiver", even though I am connected via Bluetooth. I stopped and restarted the static session, but, I received the same error. I ignored it because the T2 appeared to be collecting data. I collected data for 3 hours. At the end of the day, I downloaded the file which was very small and processed it. It collected data for 2 minutes!
Before returning, yesterday, I downloaded the firmware again. This time I set up as usual and began the session. I did not receive any errors. The dialog box appeared "Starting Survey". I set the T2 to log data every 30 seconds. Everything appeared to be working normally, but, I noticed that there was no epoch count showing on the tablet screen, anywhere. It's been a while since I have collected static data, but, I thought, before the update, there was an area on the tablet screen that counted the epochs. Anyway, I collected data for another 3 hours and returned to the office only to find there was absolutely no file to download.
I don't know if the firmware changed the settings in the T2, but, it's a paperweight right now. Also, I don't know if it is the T2 or the recently update JAVAD program that is creating this problem.
Is there anyway to restore the settings to the previous firmware?
Thanks in advance for any help!