T3 power problems.

ZTkowasz

Member
When I went to Turn my T3 on today, It would light up for about 30 seconds, then shut off. Battery was fully charged, and the battery indicator flash green prior to shutting off. After about 7 or 8 attempts it finally stayed on and ran as usual the rest of the day with no issues. Has anyone else run into this?
 

ken larson

Active Member
Also having issues...full charge this AM...power light never came on, but finally got up and running....had to turn Bluetooth and wifi on for some reason.

I am a little behind on updates not wanting to switch to 4.0 and upset the work stream.

All good now...I think as I leave the road
 

ken larson

Active Member
Just got it ....hope magicaly this issue goes away on its own, but suspect it may be a mechanical issue with the button
 

Shawn Billings - Javad

Active Member
JAVAD GNSS
When powering off, hold the power button until you see the three LEDs on the right flash red, then release.

When powering up, you need to hold the power button down for about three seconds.
 

ken larson

Active Member
So I found pressure on the left edge of the power button is working for on off...feels temporary but here's hoping
 
Top