Trajectory fails to record.

Nate The Surveyor

Well-Known Member
Friday, I did a small trajectory. It seems that it failed to record it.
There was no indication that anything had gone wrong, in the field.
Any suggestions?
I've had this happen before, where the first time trajectory is used in that day, nothing shows up. But, the second time used, it works just fine.
Thanks,
Nate
 

Nate The Surveyor

Well-Known Member
My son and I have tried this 3x. Three different days.
Always fails on first attempt to store.
2nd and 3rd do fine. I've discussed this with him.
Nate
 

Michael Stazhkov

Developer
JAVAD GNSS
Friday, I did a small trajectory. It seems that it failed to record it.
There was no indication that anything had gone wrong, in the field.
Any suggestions?
I've had this happen before, where the first time trajectory is used in that day, nothing shows up. But, the second time used, it works just fine.
Thanks,
Nate
We still can't reproduce the bug here. Could you describe your steps in details.
In the current PreRelease for such cases I have added possibility to auto-recover Trajectory. Go to Points -> Trajectory -> context menu -> Recover Lost Trajectories.

EXPLORER-OBJECTS_20210628-17.33.05.png
 

Nate The Surveyor

Well-Known Member
I'm on release Jfield 3.0.10402.
It's a huge file. 1400 points.
Action>Collect>Point>Trajectory (OK) then START and STOP.
And, this job has a number of trajectories.
I tried to attach the file. It said no, too large. So, I'm "sending project to support"

Its Reed222.
Thank you
Nate
 

avoidthelloyd

Active Member
I have this happen a few times in the last month or so. The first trajectory is not in my .dwg file that exports from my LS+.
 
Top