I have measurements obtained from a Triumph-1 receiver (sorry for posting in 1M but I could not find another forum category). The measurements were carried out using RTK with corrections using VRS but the user of the receiver had set a specific projection and a custom geoid model for the measurements. As I am interested to have the geodetic coordinates (φ,λ,h) of the receiver in the coordinate system of the base station, I found that my only option is to use the .rw5 file. A sample is provided below:
BP,PN0251,LA27.561824425800,LN32.553879840100,EL46.2790,AG1.800,PA0.111,--
--Entered HR: 2.0500, Slant
LS,HR2.1045
GPS,PNR1033,LA27.561827283971,LN32.553882494836,EL45.416463,--
--GS,PNR1033,N 4199236.1943,E 405603.7723,EL7.9349,--
--GT,PNR1033,SW2135,ST116765000,EW2135,ET116765000
--HRMS:0.023, VRMS:0.026, STATUS:FIXED, SATS:7, PDOP:3.262, HDOP:1.830, VDOP:2.701
--DT12-07-2020
--TM11:30:06
The GPS line has the coordinates of the receiver. So the questions is how can I get φ,λ,h on the ground point in the reference system of the Base Point?
Do the GPS coordinates (LA,LN,EL) refer to the coordinate system of the Base Station?
Do these coordinates (LA,LN,EL) refer to the the Antenna Reference Point, to the Phase Center or to the point on the ground taking into account HR?
Have the offsets for L1 and L2 been taken into account?
Thank you for your time
BP,PN0251,LA27.561824425800,LN32.553879840100,EL46.2790,AG1.800,PA0.111,--
--Entered HR: 2.0500, Slant
LS,HR2.1045
GPS,PNR1033,LA27.561827283971,LN32.553882494836,EL45.416463,--
--GS,PNR1033,N 4199236.1943,E 405603.7723,EL7.9349,--
--GT,PNR1033,SW2135,ST116765000,EW2135,ET116765000
--HRMS:0.023, VRMS:0.026, STATUS:FIXED, SATS:7, PDOP:3.262, HDOP:1.830, VDOP:2.701
--DT12-07-2020
--TM11:30:06
The GPS line has the coordinates of the receiver. So the questions is how can I get φ,λ,h on the ground point in the reference system of the Base Point?
Do the GPS coordinates (LA,LN,EL) refer to the coordinate system of the Base Station?
Do these coordinates (LA,LN,EL) refer to the the Antenna Reference Point, to the Phase Center or to the point on the ground taking into account HR?
Have the offsets for L1 and L2 been taken into account?
Thank you for your time