Triumph-1M OPUS

toivo1037

Active Member
NGS lists 2 versions of the T-1M in OPUS.
I have run several files though, and they are very close, but not exactly the same.
NGS:
JAVTRIUMPH_1M (receiver)
JAVTRIUMPH_1MR (receiver with radio modem antenna)

I incorrectly thought the second one was with the UHF antenna on, but that seems to be incorrect.
If that were true, the difference in the solutions processing with the same antenna height should be about 0.595ft. However the difference I am seeing is around 0.03ft - and I am also seeing a very small difference in the horizontal (less than 0.01ft) but a difference nonetheless.

So, which receiver profile should I really be using on a T-1M with serial numbers in the 20350 area?
And instead of processing it with my fixed height of 2M, I should be using 2.181M correct?

Would also like to compare DPOS on this point, but have not found instructions to manually upload files - is that just for LS users?
 

Matt Johnson

Well-Known Member
5PLS
I incorrectly thought the second one was with the UHF antenna on, but that seems to be incorrect.

No, you are correct but the ARP is the same for both models. The only difference are slight variations in the calibrations. See the NGS diagrams:

JAV_TRIUMPH-1R / JAV_TRIUMPH-1MR

upload_2017-8-3_11-49-32.png



JAV_TRIUMPH-1 / JAV_TRIUMPH-1M

upload_2017-8-3_11-50-23.png



A DPOS web portal is available at https://app.javad.com/jca/#/dpos/upload
 

toivo1037

Active Member
Thanks much. Clarifies a bit.

Can you please direct where to go for help with DPOS? I was signed up from before, and can not access the site as it keeps saying that my password is invalid. I reset it 4-5 times, but it still won't grant access to the portal.
 

Matt Johnson

Well-Known Member
5PLS
Thanks much. Clarifies a bit.

Can you please direct where to go for help with DPOS? I was signed up from before, and can not access the site as it keeps saying that my password is invalid. I reset it 4-5 times, but it still won't grant access to the portal.

Send @Dmitry Ostrikov a message if you cannot get logged in. He should be able to help you.
 
Top