Triumph-LS Radio in Bootloader mode

[Rielly]

I'm being prompted that "The Radio is in bootloader mode. press OK for Recovery." After I run the recovery it prompts to "Recovery completed, please reboot the LS" Which I have done, but doesn't seem to change anything.

 

[Matt Johnson]

I'm being prompted that "The Radio is in bootloader mode. press OK for Recovery." After I run the recovery it prompts to "Recovery completed, please reboot the LS" Which I have done, but doesn't seem to change anything.

Please leave it connected to RAMS overnight so it can be fixed.

 

[Rielly]

ok, we're connected.

 

[Matt Johnson]

@Vahe Tadevosyan please try to recover the radio firmware. It is on rams.javad.com:8800 SN 00767

 

[Rielly]

just tried, no luck.

 

[Vahe Tadevosyan]

@Vahe Tadevosyan please try to recover the radio firmware. It is on rams.javad.com:8800 SN 00767

Restored and ready to use. Please try.

 

[Rielly]

Not getting "bootloader" message anymore, but some thing still isn't right. Will leave on RAMS, and plugged in tonight. Thank you.

 

[Matt Johnson]

It works when I recall the FH915 RTK Rover profile and start the base.

 

[Rielly]

Seems to be working fine. Not sure why my NYSNET network was also effected, but its working. Putting it on the baseline now. Thank you for the 24/7 support.

 

[Matt Johnson]

Not sure why my NYSNET network was also effected

I fixed this profile too. It was changed to a radio profile.