Use of the Record Button on the T-2?

Shawn Billings

Shawn Billings
5PLS
Go to browse files. Press and hold the up arrow at the top center of the screen to get to the system root. The file could be in one of two places: SD Card> jdata> maps> [project name]> raw data
or
Internal Memory> jdata> maps> [project name]> raw data

It depends on whether the current action profile you had selected when you downloaded the file is set to record raw data in the internal memory or the SD card.
 

Shawn Billings

Shawn Billings
5PLS
Some other questions:

Do I need to specify the epochs/second as explained above or is it now defaulting to 1 based on the latest firmware?

Once I find the static file on the LS, can I DEPOS it separately or does it have to associated with another base file?

Where can I assign a point number (name) to the point I am collecting static observations on?

Thanks.

The record light on the Triumph-2 will flash on the recording interval.
You cannot send a file to DPOS from the Triumph-LS without an associated base file.
The Triumph-LS will not allow you to assign a point to this raw data file (to my knowledge).
 

Duane Frymire

Active Member
Duane: thanks for the reply. There are no files in GNSS Raw section of files collected by user.
I'm not sure then. Hopefully someone else can answer. The way I do it is connect the T2 to netview/modem on the computer. Download the file to computer, then send to DPOS. Have also done it using android app. But I can see why you would want to do it through LS.
 
Thanks Shawn. I found the file and attempted to add it to the base file for that day using the additional actions screen, 'Attach GNSS file'. I re-deposed the base file, but, I don't see anything in the results or the points menu for the T2 static (.jps) file.

If you can't directly create a point from the static file, I would assume that you could manually type in the coordinates in the points menu and create a point, similar to what we used to do with OPUS. I need to find the reduced raw data file first.
 

Shawn Billings

Shawn Billings
5PLS
"Attach GNSS file" is for attaching the raw data file for the base to the base point, not for attaching additional files to a base point that already has a raw data file.

You can send the raw data file to DPOS through your computer or using Javad Mobile Tools, then put that coordinate in J-Field.
 
Shawn: when you say 'computer', I'm assuming that you mean PC? Is there some way to send a .jps file to DEPOS apart from the LS? I don't have Javad Mobile Tools.

And, thanks for taking this time to answer my questions.
 

Duane Frymire

Active Member
Shawn: when you say 'computer', I'm assuming that you mean PC? Is there some way to send a .jps file to DEPOS apart from the LS? I don't have Javad Mobile Tools.

And, thanks for taking this time to answer my questions.
Glen, you can use netview software to connect T2 to PC. Then simply highlight file and download to PC folder. Go to DPOS website and insert the file. https://javad.com/jgnss/products/software/netview.html
 
Top