Victor LS Problem

Dennis M

New Member
Hi everyone!

I recently purchased a Victor LS and I'm using it with a T2. I've got it up and working. Connects to RTN and I can survey with it with no real issues. The problem I'm having is I cannot get the verification RTK v6 to work. It shows no data on the engine screen (see attached pics). I'm also needing the Iowa low distortion projections. They were in the JMT app I was using, but aren't in Jfield. I'm not sure why. If these could get sent to me, it would be much appreciated. I have posted several screen shots of my setup and Jfield version. It says the software is up to date. Any help would be appreciated.

Thanks,

Dennis


date date.
IMG_0256.jpg
IMG_0257.jpg
IMG_0258.jpg
IMG_0259.jpg
IMG_0260.jpg
IMG_0261.jpg
 
Hi Dennis, you might want to try this :


I'm constantly reading the manual (basically same as LS, some differences though), but I'm finding it's just as good as LS if you have the patience and collect adequate raw data for PP (with short baselines) in high multi path areas. All of the raw GNSS data is stored in the T2
 

Dennis M

New Member
Hi Dennis, you might want to try this :


I'm constantly reading the manual (basically same as LS, some differences though), but I'm finding it's just as good as LS if you have the patience and collect adequate raw data for PP (with short baselines) in high multi path areas. All of the raw GNSS data is stored in the T2
 
It's a great system for the cost, you should review this also:

 

Dennis M

New Member
I tried the RTK4 firmware update. It worked and I'm now able to use the v6 verification. Seems strange that you have to use a 2017 beta version firmware to do it, but that's okay. Thanks to all who helped, I greatly appreciate it.

I'm hoping someone can now point me in the right direction to get the Iowa local coordinate systems. Anyone know the best way to obtain these?

Thanks,

Dennis
 

Dennis M

New Member
Yeah I know. That's where I found them in JMT, but they are not in my Victor LS for some reason. I was hoping I could export it out of JMT, but that doesn't appear to be an option.
 

Matt Johnson

Well-Known Member
5PLS
Ok, I checked and see that the GeoData version 2.4.6.40416 for the Victor-LS is an old version but still contains the Iowa coordinate system. Is this the GeoData version you have installed? If so, then it seems that you are looking in the wrong place.
 

Dennis M

New Member
I tried the update and it doesn’t do anything. It’s telling me everything is up to date. The versions it’s showing is pictured above in previous post.
 

Dennis M

New Member
I tried the force update but still wouldn’t work. The update button was still grayed out. It says everything is updated. I also double checked the coordinate systems. All I have is Wisconsin and Minnesota. At this point it might be easier if someone could export it and send it to me. The one I really need is Iowa zone 14 Burlington.
 

Dennis M

New Member
I checked and it was. It goes through the process of checking for updates with no errors. It just comes back that everything is up to date.
 
Top