Error upon DPOSing a RTK Project

R

Richard Sunden

New Member
Hello,
Did a normal RTK project using an LS and T2 base. Sending the base point to DPOS results in an "Adjustment error" statement. Can someone take a look and explain problem and the solution? The zip file is too large to upload here. How can we get around this?
Thank you.
Richard Sunden
 
Michael Stazhkov

Michael Stazhkov

Developer
JAVAD GNSS
Richard Sunden said:
Hello,
Did a normal RTK project using an LS and T2 base. Sending the base point to DPOS results in an "Adjustment error" statement. Can someone take a look and explain problem and the solution? The zip file is too large to upload here. How can we get around this?
Thank you.
Richard Sunden
Click to expand...
Hello Richard,
The problem is that you have a point with not alphanumeric character in the name and the GNSS file also has the same character in it's name (J17035•MAGS_075002.jps). Our software has bug and can't process the point correctly on DPOS.
We will fix the bug in our software but as the quick solution I suggest:
1) Remove the existing DPOS task from the DPOS screen.
2) Rename the GNSS file (J17035•MAGS_075002.jps): go to Files screen -> "Collected with Point" -> GNSS Raw, select the file and press edit button.
3) Recover the DPOS task: go to Point list, select the J17035•MAGS point, press "Additional actions" button, select "Recover DPOS session" of the second page
 
R

Richard Sunden

New Member
Michael Stazhkov said:
Hello Richard,
The problem is that you have a point with not alphanumeric character in the name and the GNSS file also has the same character in it's name (J17035•MAGS_075002.jps). Our software has bug and can't process the point correctly on DPOS.
We will fix the bug in our software but as the quick solution I suggest:
1) Remove the existing DPOS task from the DPOS screen.
2) Rename the GNSS file (J17035•MAGS_075002.jps): go to Files screen -> "Collected with Point" -> GNSS Raw, select the file and press edit button.
3) Recover the DPOS task: go to Point list, select the J17035•MAGS point, press "Additional actions" button, select "Recover DPOS session" of the second page
Click to expand...
Hello Michael, your solution worked well. :)Thank you, Richard.
 
You must log in or register to reply here.
Top