dpos

  1. Vladimir Zhukov

    DPOS temporary outage

    Dear customers, We regret the inconvenience caused by the interruption of our DPOS service. All at JAVAD appreciate that free post-processing is a valuable feature for our users and the unavailability has changed your usual workflow. Our team is working diligently on restoring the DPOS...
  2. Tyler

    Base battery died in field - points will not post process

    Our Triumph 1-m base died in the field before being able to "stop" the base. The base was turned on the following day and was still running and needed me to press the "stop and download" button. Once I had downloaded the base file I tried to DPOS and all but one of my points is on FLT or STN...
  3. SynGeo

    Peculiar DPOS processing problem

    We're running two Triumph LS, one as the base and the other as the rover connected over LTE. At the end of the day, we copy the base file via dropbox over to the rover, attached it to a recovered base point and process it. Over the last couple jobs (last three days) the file uploads to DPOS but...
  4. J

    DPOS Triumph 2 files failure

    I have 3x Triumph 2 files that were processed with DPOS. They are in the range of 100+ meters off location when I verify the coordinates (GIS & other software). I am postprocessing with RTKPost against a 2nd Triumph 2. I am unable to get a solution with RTKPost for these. However DPOS does give...
  5. Tyler

    DPOS Report Questions

    I have a couple questions regarding the DPOS Report for our GPS base station. 1. What determines which CORS stations are used? a) I have one report from the first day on site which chose 3 CORS stations (P196, P198, P206). The geometry of stations around our base point was not great...
  6. R

    PPK SOLUTIONS FROM POINTS COLLECTED OVER RTN NETWORK

    Does anyone know if there is a way to get ppk solutions while collecting data over an RTN network. I had the box checked to download rtn base data in the “what to record” settings, but no base point was created in DPOS that allows me to use it for trying to resolve those readings, nor can I see...
  7. Tyler

    DPOS question

    After comparing measured coordinates for multiple stations in the area to the NGS published coordinates of these stations, I am consistently getting 0.06 to .12 feet between the two values which seems great. However, I was wondering what is being held to establish these measured coordinates. Is...
  8. Tyler

    Processing GPS data in StarNET

    Hi all, We have done a conventional survey and also surveyed in a couple of the monuments with GPS which are approximately 500 feet away. We have post processed the GPS with DPOS and would like to adjust ALL of the measurements with Starnet. We are not sure of the best way to do this. Do you...
Top