Sean Joyce
Well-Known Member
On a new project, I took 2 measurements on a control point and averaged them. (autonomous)
Points 2 and 3 are the observations and point 4 is the average of the 2& 3.
I typically average the point right after the observations are taken so it is not overlooked later.
After the DPOS adjustment point 4 has the same unadjusted coordinates from the autonomous survey.
Points 2 & 3 were adjusted.
The averaged point appears to be treated like a design point (no adjustment).
It looks like now I have to go through my recent projects and check for any point adjustment errors.
Any way to fix this so averaged points are treated differently and considered surveyed points ?
Points 2 and 3 are the observations and point 4 is the average of the 2& 3.
I typically average the point right after the observations are taken so it is not overlooked later.
After the DPOS adjustment point 4 has the same unadjusted coordinates from the autonomous survey.
Points 2 & 3 were adjusted.
The averaged point appears to be treated like a design point (no adjustment).
It looks like now I have to go through my recent projects and check for any point adjustment errors.
Any way to fix this so averaged points are treated differently and considered surveyed points ?