Grid to ground

[Michael]

Set up base using TN SPC. Did multiple shots on points for control work. Normally I would set up a Adjust Grid to Ground and Adjust Rename coordinate system and shot points. Didn't do that in this situation (my bad). Don't want to reshoot in grid to ground. Have created a coordinate system for grid to ground now and of course no objects in that system. Any way to get those points in grid to ground ? Mike

 

[nusouthsc]

Mike,
You should be able to just assign that adjusted ground system to the current page you are working in.

 

[Adam Plumley]

Or you can tap project and edit project and then tap the coordinate system and pick the ground system then select it.

 

[Matthew D. Sibole]

I typically do what Adam suggested.

 

[Michael]

Thanks guys. Edited page