GVX Snag in Batch Export

Kelly Bellis

ME PLS 2099
5PLS
RE: J-Field 3.0.11.816

Background
Project was originally run with the wrong geoid (EMG2008, my rusty inattentive bad) on Triumph-LS Plus (00881), archived, and shared - Many thanks to Linda Campbell for her help! Later, the archived project from 00881 was unpacked on another friend's Triumph-LS (00833) - Many thanks to Sage Collins for the loan of his Javad gear! The correct geoid (Geoid18B) was selected, and for good measured, I went ahead and re-DPOSed the project without issue.

This morning I noticed that the Batch Export halted with the GVX option checked, but did not have any problem exporting all other formats when GVX was unchecked. The issue is reportedly linked with a missing base, though its name is not clear, and for this project, there was only one base (Triumph-1M). Once the message about being unable to create a valid GVX and OK is tapped, the batch export halts, returning to Homescreen1. The workaround allowing for the batch export to complete without issue is to uncheck the GVX option.

20211111-07.15.27_00833_Batch_Export.png


20211111-07.42.32_00833_Save.png


20211111-07.25.08_00833_Batch_Export.png
 

Michael Stazhkov

Developer
Staff member
5PLS
RE: J-Field 3.0.11.816

Background
Project was originally run with the wrong geoid (EMG2008, my rusty inattentive bad) on Triumph-LS Plus (00881), archived, and shared - Many thanks to Linda Campbell for her help! Later, the archived project from 00881 was unpacked on another friend's Triumph-LS (00833) - Many thanks to Sage Collins for the loan of his Javad gear! The correct geoid (Geoid18B) was selected, and for good measured, I went ahead and re-DPOSed the project without issue.

This morning I noticed that the Batch Export halted with the GVX option checked, but did not have any problem exporting all other formats when GVX was unchecked. The issue is reportedly linked with a missing base, though its name is not clear, and for this project, there was only one base (Triumph-1M). Once the message about being unable to create a valid GVX and OK is tapped, the batch export halts, returning to Homescreen1. The workaround allowing for the batch export to complete without issue is to uncheck the GVX option.

View attachment 12129

View attachment 12131

View attachment 12130
Hi Kelly, could you send the project to support.
 

Kelly Bellis

ME PLS 2099
5PLS
Hello Michael, thank you for the reply. I've just now sent a log file to Support via the Triumph-LS, Support, Send Log to Support option.

Should the archived project upload be accomplished using J-Field assistant accessing my Google Drive?
 

Michael Stazhkov

Developer
Staff member
5PLS
Hello Michael, thank you for the reply. I've just now sent a log file to Support via the Triumph-LS, Support, Send Log to Support option.

Should the archived project upload be accomplished using J-Field assistant accessing my Google Drive?
We need the project, log file is not enough. You can send the current project from the Projects screen -> Sent Project to Support
 

Kelly Bellis

ME PLS 2099
5PLS
OK, thanks, I will do that. Also, FWIW, I placed them (before and after) on my Google Drive, and have emailed a link to you directly.
 

Kelly Bellis

ME PLS 2099
5PLS
By the way, I retired at the end of 2018, sold all of my field equipment to a very nice young man out in western Maine, Isak Porter. As it turned out, this fate then permitted me and Pam to begin caring for for my demented mother in May 2019 until she passed at the the age of 90 not quite a year ago. I do very much miss my Javad gear for my science projects! And it's great to see how J-Field has matured over the past few years while I've been away. Fortunately, I'm very fortunate to have friends living in my county (Hancock) that have the Triumph-LS and have been so graciously sharing - many thanks to them!
 
Top