-
-
Armen Harutyunyan reacted to JAVAD Support's post in the thread I have found a sequence that crashes my LS every time with
Like.
Hi Nate, We do not see the same issue. However, we will look at your provided 'crash report' data and get back to you . . . Running the... -
Armen Harutyunyan reacted to JAVAD Support's post in the thread JAVAD Data Collector (JDC) with Like.
The automatic update of JDC v1.0.9 is available - see https://www.javad.com/support/firmware/release-notes/jdc-1-0-9/
-
Armen Harutyunyan replied to the thread No Epoch Shot Rejection.Yes, that workaround makes sense. I’ll discuss the priority with the team.
-
TRIUMPH-3NR (Replacement for Triumph-2) The TRIUMPH-3NR (latest JAVAD v3 GNSS Network Rover) is a small, lightweight, and powerful GNSS...
-
Armen Harutyunyan reacted to John Rosco's post in the thread Rover Has No Compatible Radio with Like.
The original Triumph-2 has been replaced.
-
Armen Harutyunyan reacted to John Rosco's post in the thread Only getting GPS and Glonass on Rover. with Like.
The transmission format for the' Remote Base' needs to be set to RTCM 3.2 MSM3 so as to provide GPS+GLO+GAL+BDS RTCM corrections to the...
-
Armen Harutyunyan reacted to John Rosco's post in the thread September 2025 J-field pre-release update - concerns about font color and user button readability changes. with Like.
The best way to update the JAVAD Smart-Antenna GNSS receiver firmware is to use the NetView software application and connect the unit to...
-
Armen Harutyunyan reacted to Matt Johnson's post in the thread September 2025 J-field pre-release update - concerns about font color and user button readability changes. with Like.
Bill, updating the base firmware is currently not available through Remote Base. You need to connect the base to Netview to update the...
-
Armen Harutyunyan replied to the thread September 2025 J-field pre-release update - concerns about font color and user button readability changes..The new Pre-Release J-Field 4.0.1.675 is now available, and it includes the reversion of the white box behavior to the original...
-
Armen Harutyunyan reacted to Matt Johnson's post in the thread RTK Verification with New Boundary, Precise Topo and Topo Profiles with Like.
Three new action profiles for the Triumph LS+ have been added to J-Field version 4.0.1.699. This post and the attached document details...
-
Armen Harutyunyan reacted to Matt Johnson's post in the thread LS+ Action Profile Settings with Like.
I just found the issue. When the sunscreen is enabled the font of these buttons is being shown in a white font. Turn off the sunscreen...
-
Armen Harutyunyan replied to the thread LS+ Action Profile Settings.Thanks for the report - we’re investigating. Once we reproduce it on our end, we’ll fix it.
-
Under tree canopy and anywhere where there is a lot of multipath like next to buildings, the Boundary profile should be used for both...
-
Armen Harutyunyan reacted to Vladimir Zhukov's post in the thread Manually programming engines for better performance, no longer using 'auto setup rtk' with Like.
Dear JAVAD Friends, We are pleased to announce that a new version of GNSS Firmware (4.2.0.4) and J-Field (4.0.1.671) is now available on...
-
Armen Harutyunyan reacted to Matt Johnson's post in the thread Matt's Engine Configuration with Like.
J-Field can now configure the RTK engines automatically with 2 signals per constellation in the PreRelease version. See the release notes:
-
-
Loading…
-
Loading…