Bryan Enfinger

Here is the scene. I have around 600 coords in a small town coord file. They are LISTED as 1-665, plus a number of design coords...

Thanks. I put in a request for one of the engineers to log on and take a look at my unit earlier this week and it stayed connected to...

I heard awhile back that all Russian staff were in the U.S., but that's just hearsay. My guess is that the disarray is due to Javad's...

I've had this same problem until I entered our state plane code "SC 3900" under "Report Coordinate System". I usually check my office...

Agreed, Jim. A robot is FASTER. Many times, the places I go, are going to need 50 shots. And, of that 50 shots, only 10-20 need 3...

When I said "wrong tool" I didn't mean that you *can't* get good data with GNSS, I meant that getting that good data may take an...

Well, Jim, it will work well. IF IF IF, it's just dirt work, and + - 0.10' is ok. IF you are working with concrete, and the like, it's...

I cop to being old school (as well as just plain old), but in my opinion GNSS is the wrong tool for the conditions described. Some...

That configuration in canopy will get you bad shots. GPS and Glonass only has to have time between fixes to prove a good shot...

And if you're using RTN don't forget to monitor station status. I'm not sure what MA has for that, but NY has a twitter feed or you can...