Recent content by Nate The Surveyor

  1. Nate The Surveyor

    No White Boxes in Stake Mode

    I've done that....!
  2. Nate The Surveyor

    Trajectory not working

    Check to be sure you are either in "external antenna" mode, with an external antenna attached, or are in "internal antenna" mode.
  3. Nate The Surveyor

    LS Handle

    Hayes has the 3" extension. https://hayesinstrument.com/product/3-inch-extension-1-inch-od/ and the Quick release: https://hayesinstrument.com/product/anti-rotation-quick-release-assembly-5111-04/ So, with the Javad adapter, (1" long, and 5/8"x11 at one end, and 1/4" thread on the other, to go...
  4. Nate The Surveyor

    LS Handle

    @ Philip Lancaster
  5. Nate The Surveyor

    Will a 12V 20Ah LiFePO4 Battery run the radio on 35w all day?

    A solar charger, WITHOUT a "Monitor", or a voltage regulator, can over volt the battery. I think the radio can handle up to 20 volts, it indicates that it is do-able, but a regulator would be a good idea. Nate
  6. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    I started a completely NEW job today. NO PROBLEMS. Performance was back. Possibly some odd setting in the database, started long ago. Nate
  7. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    I used it today, and signals variety NEVER got above 1.00. Many had 3 mins with a variety of 0.62. Last week, it often finished with 2.12 Variety. What setting do I need? Thanks Nate
  8. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    OK, So, Mr. Matt Johnson, what settings were used for that above test? I have read all that several times. Please make that information available on a LOWER shelf. (For people like me) Thanks Nate
  9. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    Next, I went: Setup General RTK/DGPS> Advanced RTK Settings> (Now engines 1-4 are listed) Engine 1 is Set: AFCL Extra Low (90%) -Elev 12.0- and Max Signals 28 Engine 2 is Set: AFCL Extra Low (90%) -Elev 12.0- and Max Signals 30 Engine 3 is Set: AFCL Extra Low (90%) -Elev 12.0- and Max Signals 30...
  10. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    OK, I spoke with Steve Hankins. He recommended some changes. This is a screenshot of how I found my T-3 configured. How I got here is: Main Screen Remote Base Triumph 3, (directly beneath the START BASE button) System Signals and Tracking> But, I am turning ON: Glonass L3 - Galileo E5aBoc -...
  11. Nate The Surveyor

    Loss of performance, on a Job with screenshots

    These First 3 are from last week. Getting 32 sats, and 2 extra These next 3 are from an old file, that I just loaded, and added to it. Both sets of screen shots were taken last week. As you can see, the second 3 screen shots are using 12, and tracking 3, or 10+10 So, What settings need to...
  12. Nate The Surveyor

    T3NR Elevation Bust Problem: Calling All Thinkers

    My point is, Check things yourself. So you really know. N
  13. Nate The Surveyor

    T3NR Elevation Bust Problem: Calling All Thinkers

    I do not know what the problem is. But I do know a solution. Set both base and rover up on the SAME elevation. Maybe a board between 2 tripods, or a table, or such. Let em cook for 4-6 hrs. Take back inside, and Post Process, and check RTK. You can set it to record several hundred RTK shots...
  14. Nate The Surveyor

    Rebooting to get the shot...?

    Too many. Backup and clear it out. Nate
  15. Nate The Surveyor

    Rebooting to get the shot...?

    How full is your LS? I have noticed when it is FULL of jobs, everything goes slower. Nate
See more
Top