Nate The Surveyor

We are surveyors. Roughly translated, that means we used to apply a TRANSIT and a TAPE, and CLINOMETERS, and brushaxes, and plumb bobs...

It seems odd that JAVAD Support started this thread to promote an app that's no longer available. Color me confused.

Who can you contact Matt? Pre-war this would have been resolved after two posts. Javad (and his Team) were never satisfied with...

Is it discontinued?

The Triumph-LS+ 'rover' can connect to the Internet to obtain NTRIP corrections from an RTN source. Thus, no need to setup a Triumph...

Jerci still works. But you have to re hook the connection. Delete the old one.... And re make Bluetooth. A few minutes of the doing it...

To get you started, Javad has created a RAMS-Desktop application application for Windows that contains a Server and a Viewer in one...

I place the LS+ up on top of my Polaris Ranger, on the drivers side top. Hook up JERCI. And drive about 10 mph. Using Trajectory, on a 1...

Javad Equipment Remote Control Interface (JERCI) is an Android mobile application that can be used to control Triumph-LS/LS+ receivers...

I ran the LS+, and T-3, with UHF radio, at 20 watts, and During GOOD times of the day, flagging line through DENSE pine forest...

Josh, What I meant is having the development team modify the Jfield code to allow acceptance of the RTPK point without having an RTK...

Mark, It is setup to do that. You can toggle to either solution. But if you don't have any RTK epochs, it will reject the shot, even if...

Or just leave it set to GPS time year round...works for me!

Um, It's time to "Fall Back". Don't forget to update the time in your LS. Menu 2 System Timing Here, you can set it. Nate

I agree that this is an issue that should be fixed. @Armen Harutyunyan The work around for this that should work in Stakeout menu is...