Recent content by Scott Harmon

Is it a special cable, I have many of those type of cables not sure which is which

I really want to use this feature. We do ALTA Surveys and building heights are a requirement, it would be much easier to collect a point and take a picture of the building to get this data. How can I tell if my unit has the "Camera Offset Survey Option enabled"

I am trying to connect the LS to a computer through a USB, using the mini USB port, Can not seem to connect. I am trying to go into the SIM card to delete old projects. without actually pulling the card. Maybe this is not the correct way to delete old projects. I know you can go into the files...

Does anyone know if you can export the endpoint coordinates of a polyline (I inserted an autocad drawing into the LS ), as a text file. The reason is to create a cogo file, from the inserted autocad drawing into the LS. Trying to figure out a way to take a drawing that we have created in...

No we are not doing that. We will now.

Yes, confidence is at a 7

Minimum RTK engines is set at 1. What should it be set at ? I went into advanced settings and changed it to 3, I went back into that menu and hit default, and it changed it back to a 1. So if we need to have this at a 3, and a 1 caused the problems, that is the answer.

Yes, were using both. One other thing I should note. I did not see it with only 2 engines on this shot. This shot was 3 I think, we set the LS on the pin we had just set and the readout was between .01-.03 North and .00-.04 East. Then we located it with 150 epochs

Hello all, I am new here, so keep that in mind. We used the LS today to locate property corners, and stake out points, we had previously been in the field on this job and located additional points with the LS. We staked out a property corner, set it and then located it, when I returned to the...