I am downloading the Triumph 3NR to the computer using Netview (4.3.0.1) then
sending the file to DEPOS. I do not see a Triumph 3NR in the DEPOS antenna list to pick.
I am not feeling warm and fuzzy about the ortho heights I get from DEPOS with the Triumph 3NR.
I do not see a specific antenna listed in DEPOS for the Triumph 3NR. I did a 2 hour occupation on
a published monument and processed in DEPOS with the antenna set to auto. The horizontal coordinates...
Another test drive with the T3NR and JMT. Not very scientific but ok.
We collected 19 points using a Geomax Zenith 35 with Carlson Surv PC on Leica Smartnet (IMAX).
After each point was collected we immediately collected the same points with the Triumph 3NR
using JMT on the New York state...
Has anybody noticed a problem with the ortho heights using the Triumph 3NR and JMT?
I took the T3NR and JMT out for a test drive Feb. 02, 2024 using the NYSNet network.
I visited 5 published benchmarks all had 2 OPUS shared observations all locations had very good
open sky. The marks were 2 to...
I have the Triumph-3NR in the list in JMT.
When I download the file with Netview and send it to DEPOS using the antenna setting on AUTO DEPOS does not chose any antenna and the result appears to be about 6cm high. See report
I try to send the file directly from the phone, I get to the "what to...
OPUS has a similar note for the triumph 2 and the triumph LS "Antenna with adapter"
but the drawings in the NGS antenna calibration data for the T-2 and LS clearly show
the ARP at the bottom of the receiver not the adapter. No drawing for the triumph-3NR.
What antenna do we use post processing Triumph 3-NR files
Did a 2 hour sit on a published monument (13A3 PID KV6942)
Downloaded file with NetView and converted to RINEX with jps2rin
Ortho height 39.220 meters from Data Sheet
Ortho height 39.224 meters from OPUS Shared
DEPOS solution ( I do...
My last try with JMT and the 3NR was using NYSNet in new jersey approximately 600 yards from the NJNT cors (I.D.73) with open sky.
The positions collected look good but JMT was struggling to FIX it would jump between Std and Flt eventually FIX then jump back to
Std or Flt. Using a phone for a...
Just getting started with JMT. I like it so far. When JMT first hooks up to the T3NR it shows satellites in all four constellations while autonomous. When it switches to a float
solution Galileo and BeiDou drop out and my final fixed solution is GPS and Glonass only. Am I missing a setting in JMT?
I recently purchased A Triumph 3nr. I downloaded JMT-R to a Samsung Galaxy S20 FE 5g phone.
When I try to connect to the receiver I get a message that the receiver is not authorized.
What do I have to do to get things working. Do I have to buy the full functional version
of Javad mobile tools...