Aaron S
Active Member
On the Calibrate screen, it shows the last time you calibrated a certain sensor. I'm always asking (but never remember) how often to calibrate the compass, levels, and level offset. Since there's plenty of room on the screen, why not have a little line below each button saying when the suggested re-calibrate time is? If the factors are based on temperature, time, etc. it seems the LS could easily compute these and either have pop-up reminders when it's time to re-calibrate, or just a simple line of text on the Calibrate screen.
On a related note, the "correct for tilts" function is so awesome. I know others have it, but with the LS I can intentionally move the pole out of plumb, and see maybe 1 or 2 epochs go outside the group, but after the pole stops moving, the next epochs start popping back in place - you can see it correct in real time. So cool! As long as the calibration is good, I don't even have to see the bubbles on tall shots.
On a related note, the "correct for tilts" function is so awesome. I know others have it, but with the LS I can intentionally move the pole out of plumb, and see maybe 1 or 2 epochs go outside the group, but after the pole stops moving, the next epochs start popping back in place - you can see it correct in real time. So cool! As long as the calibration is good, I don't even have to see the bubbles on tall shots.