Search results

Yesterday I could access RAMS using Edge but not Chrome. Today Edge is not working either. Seems like security settings might have changed on RAMS site?

Thank you - RAMS wasn't working for me on Chrome but works fine on MS Edge.

I prefer the all-in-one form factor.

When you determine the problem, please post. We're about to receive an LS+ back from repair and I want to be sure we don't have the same issue.

Wes - this is a shot in the dark, but when I have errors in the 3' range it has sometimes been a US Survey Feet versus international feet issue.

From our LS+ we can use Bluetooth to connect to our T3 base and start the base (broadcasting TCP, radio, or both). However, we'd like to be able to connect to the T3 remotely using TCP and start the base that way. At one time we had our equipment configured to do that. For example with the...

Thank you, Adam - very helpful. One more follow up: if the box at the bottom is green, but no thumbs up is showing, what specifically is that indicating?

Sorry if these are dumb questions: What is the significance of this box turning green? I thought it meant the RTK criteria had been met, but consistency is zero here. Also, if the box at the bottom turns green (the one I've circled in blue), does that indicate RTK/RTPK match? Thanks in...

Shawn, I came across your post about setting AFCL to Extra Low (90%) if using a LS+. Does this advice still apply? Both of our LS+ units are set to AFCL Medium (99.5%). Will changing them to Extra Low result in better/quicker fixes without noticeable degradation of accuracy? Thanks.

The ordering process doesn't have to be as smooth as Amazon - I know that's extremely expensive to set up and maintain. But the basics such as saved CC/billing info and the ability to order directly on the website is long overdue for a company like JAVAD. Please update to something closer to #1

I'll bet this question has been asked and answered many times in this forum, but my search didn't find it so here it goes again: When using web DPOS to process .jps static files from my T3, if I process 10 minutes after the session ends, DPOS uses a certain set of base stations in processing...

I experienced the same problem. DPOS not https (not secure).

This post is an example of why I use JAVAD. I'll bet the Trimble forum doesn't have a post like this. I'll bet they don't mention Greek philosophers much.

Nate, we upgraded both our LS units to LS+ and bought a T3 to go with our T2. We do lots of work in difficult canopy and can use a cellular data connection most of the time. I don't regret the upgrade decision for a second. I haven't collected data or crunched numbers and can't give you a...

Shawn, Thanks for the very thorough write-up of using the LS+ with T3. I've figured out some of what you stated through trial and error, but you added some things I didn't know. Thanks again.

Nate, the IMU (inertial measurement unit, I think) in the T3 now only serves to detect when the base has been moved as far as I understand it. But you are correct that there are other ways an IMU can be used. Maybe the folks at JAVAD will surprise us with something fun. In the meantime, it...

Shawn, I know a bit about Mobile Tools and have done some very basic testing a couple of years ago. What's the best source of information about its capabilities and how to use it? Should I just search the forums and 'self-teach' or is there a writeup somewhere? Thanks

He set mine up today. Gracias.

Can you elaborate on how you use the "Auto setup engines" button, the "Reset engines" button, and the "0/0/0" button and can you provide more detail on exactly what those three buttons do?

Someone correct me if I'm wrong, but RTPK is post-processing using the raw data collected at your base together with the raw data collected at your rover during the duration of the 'shot' (or raw data from your RTN if that's the source of your correction signal for the shot). What I don't fully...