Base File Won't Download to LS

[Matt Cotterman]

Having issues with a base file. My initial attempt to download the base file from the base receiver to the LS was going as normal then the countdown disappeared. It flashes "Downloading" but the status circle never moves. If I go into manage base files and try to re-download it acts like it's downloading counting up to 100% then it flashes back to 0% and sticks there. The base file shows up in the dpos but when you click it, it shows "Checking Base data presence". Tried hard resets, cleared NVRAM, multiple download attempts, no luck. I have a handful of points that I need ppk solutions on from this session so this base data is critical. Any help would be appreciated.

 

[Nate The Surveyor]

I've been there.
So much was going on, that I don't remember the fix. But, don't despair. They got me going.
99% chance you will be golden.
N

 

[Adam]

Try deleting the existing file then downloading again and then recover DPOS session I spoke with someone the other day having this problem and that worked. No guarantee it will work for you but it's worth a try.

 

[Shawn Billings]

If Adam's recommendation doesn't work, you can use NetView to download the file from the base receiver to your PC. Then copy the file from your PC to your Triumph-LS using Windows Mobile Device Center. You'll want to place the base raw file on the LS in the folder: Mounted Volume>VS Data>Maps>[Your Project Name]>Raw Data

 

[Matt Cotterman]

Got it! I had to copy the base raw file over from the base per Shawn suggestion then Recover DPOS session from the pulldown menu in the points screen. Thanks for your help guys!