Base Shift question & RTPK

[Greg Flowe]

I did a base shift to a known monument, worked like it should and now I have collected numerous boundary shots getting both RTPK & RTK solutions stored. Ususally I will go back through at the end of the day through the points menu and toggle through each point and look at the RTPK vs RTK and I have the ability of choosing which I want to use or hold as good. This time I do not have that choice, it is set to local and the RTK is grayed out and showing PPK & CORS grayed out. Why do I not have that choice anymore? Just because I have shifted I would not think that would eliminate me being able to choose which shot RTK/RTPK I would like to use. The info should still be here I would think. I am running Pre Release on an LS+. I tried to undo the shift and that did not undo it either..???

 

[Shawn Billings - Javad]

Long time issue. Many posts discuss it. The sum of it all is this. Switch back to autonomous solution for the base, this allows you to make selections for RTK/RTPK. Once you've selected the solution you want, then switch to Shifted position of base using MLocal. Your selections should stick.

 

[Nate The Surveyor]

I have been bellyaching about this....
N