Device Status BAD

[Mitchell D Lane]

Any ideas??

 

[Adam Plumley]

Try a factory reset. If it is still there you will likely need to send it in.

 

[Mitchell D Lane]

Reset with the power button fixes it temporarily. Random when it returns. Can you explain what is exactly failing? Explain the code.

 

[Mitchell D Lane]

?

 

[Eric Tweet]

Honestly, I'd appreciate a bit of insight regarding these codes from whomsoever may have that knowledge and the patience to describe them.

Certainly nothing to the extent of a university lecture on each one, but even a simple plain-english decoding... For example: "V-ExtAnt refers to the status of the voltage detected in the external antenna circuit. Acceptable voltages are between W volts to X volts. Failure is indicated when voltage is outside of that range."... or some such.

 

[Adam Plumley]

Honestly, I'd appreciate a bit of insight regarding these codes from whomsoever may have that knowledge and the patience to describe them.

Certainly nothing to the extent of a university lecture on each one, but even a simple plain-english decoding... For example: "V-ExtAnt refers to the status of the voltage detected in the external antenna circuit. Acceptable voltages are between W volts to X volts. Failure is indicated when voltage is outside of that range."... or some such.

I think that one in particular is Lock loop failure. I don't have a detailed explanation.

 

[Eugene Aksyonov]

V-LO - voltage per locking loop. in Volts
LK-LO - locked loop indicator. Logic. loop locked, If green. So red means the issue in RF part. And you need to consider RMA I think. That is critical.
V-xx - Voltage on the subject (xx)
I-xx - Current on the subject (xx)
OV-xx - OverVoltage on the subject (xx). Overloading in Antennas.
Other element mostly self explaining but related to specific voltages and current in Digital, RF, UHF, GSM parts and internal ASIC voltages.
All that, actually, is important to us, engineers, to help us take decision of go with RMA of not.

 

[Mitchell D Lane]

V-LO - voltage per locking loop. in Volts
LK-LO - locked loop indicator. Logic. loop locked, If green. So red means the issue in RF part. And you need to consider RMA I think. That is critical.
V-xx - Voltage on the subject (xx)
I-xx - Current on the subject (xx)
OV-xx - OverVoltage on the subject (xx). Overloading in Antennas.
Other element mostly self explaining but related to specific voltages and current in Digital, RF, UHF, GSM parts and internal ASIC voltages.
All that, actually, is important to us, engineers, to help us take decision of go with RMA of not.

Mine is LK-LO1,3. What exactly is RF part?