Force download
- Thread starter Jim Campi
- Start date
Why do you believe the file is corrupt? Is the file greater than 15 MB? If so this is the problem. There is currently a bug preventing files greater than 15 MB from being uploaded to DPOS through J-Field.
Jim Campi
Active Member
Hi Matt,
Corrupt is not the best description - I was trying to keep the post short.
I broke procedure, set up the LS and T2 in the office, didn't connect with the UHF radio and attempted to connect the receiver and base through the typical setup page on the LS. The LS returned an error that it couldn't see the GNSS receiver, although I believe it attempted a download.
Trying to send the file to DPOS results in an error. I can get that for you if interested.
I haven't attempted to review files on the T2 through a direct connection. I will do that later.
I believe the file size is fairly small - about 2 hours at a 30 sec recording interval.
Corrupt is not the best description - I was trying to keep the post short.
I broke procedure, set up the LS and T2 in the office, didn't connect with the UHF radio and attempted to connect the receiver and base through the typical setup page on the LS. The LS returned an error that it couldn't see the GNSS receiver, although I believe it attempted a download.
Trying to send the file to DPOS results in an error. I can get that for you if interested.
I haven't attempted to review files on the T2 through a direct connection. I will do that later.
I believe the file size is fairly small - about 2 hours at a 30 sec recording interval.
If you click the DPOS button found in CoGo>DPOS it should resend the file. You could also try sending the file to the DPOS Web Portal. If you started the base in office it will have data from that location and that is probably causing the error you are seeing.