Loss of performance, on a Job with screenshots

[giulio]

I'm using my ls+ with the cadastral networks of my region, unfortunately the closest base (about 18 km is only GPS and Glonass) while those 4 constellations are about 30 km away as for precision and speed of fixed the closest one works better even if it has only 2 gps frequencies and 2 glonass frequencies, while the more distant ones with 4 constellations even if they have at least 4 frequencies per constellation (gps l1 p2 lc2 and l5, ...) have fixed (and also rtpk) problems with the potentiometers struggling to become green (I tried to lower the afcl, but it didn't change the situation much, other than introducing solutions that were very distant from each other) I was asking if anyone had the same difficulties as me.

 

[Duane Frymire]

View attachment 13302View attachment 13303View attachment 13304
These First 3 are from last week.
Getting 32 sats, and 2 extra

View attachment 13305View attachment 13306View attachment 13307
These next 3 are from an old file, that I just loaded, and added to it. Both sets of screen shots were taken last week.
As you can see, the second 3 screen shots are using 12, and tracking 3, or 10+10

So, What settings need to be set different?
I just don't remember.
Thanks
Nate

Nate I notice you are using UHF and having trouble when more satellites involved. Google Mark Silver FEC on or off, for one of his blog posts. Maybe does not apply to how Javad equipment is dealing with corrections, but suggestion is to turn off FEC in radio settings and increase elevation mask to deal with those times of day when it seems things don't work (typically same time of day when most satellites are available). I just stumbled on the blog recently and haven't tried it yet.