Opzioni engine

giulio

Member
Hello everyone, I tried ls via the virtualroadshow remote link. In the 2 or 6 motor options, the various constellations and their signals can be set.
1. I have seen that L5 excludes l2c and vice versa, why can't we have both?
2. The maximum number of signals, when selecting the monitor says 10 per motor, but if I select 10, however, after that I see that it uses a maximum of 6 (photos 1 and 2)
9775


9776



3. What changes between independent or conventional?
4. For those like me who are not in America (I am Italian) the Dpos function can be replaced by post processing with rinex of a fixed regional network station (20 km).
5. Will the new ascis work differently?
Hi thanks Giulio
 

Javad

Administrator
Staff member
JAVAD GNSS
5PLS
1. You can use both L5 and L2C.
2. There are limits of signals and satellites on each engine. The number has increased a lot with the new ASIC.
3. Conventional tracking uses the L1 signal to aid the L2. Independent, does not. Both now act the same.
4. Wait for some good news with the new ASIC.
5. New ASIC tracks more signals, like L6 and AltBocs and have four Super Engines.
 
Top