Triumph-LS as base with external radio


Well-Known Member
I was able to test again today and found with multi constellations when putting it all on independent it still wouldn't send corrections to rover.
Anthony, Shawn is right. Use only conventional tracking.

Jim White

if you are working in a remote area without a lot of radio traffic, would setting the channel bandwidth to 25Kh and doubling the baud rate allow for enough data transfer to make all of the constellations work?


New Member
I was trying the base/repeater/rover setup that adam had posted. I have also tried with conventional but it didn't work.

Doug Carter

Active Member
Im connecting my LS to my new 435 JL radio through the browser On my iPhone. My problem is its not taking the IP address. The last three numbers won’t populate.It took the the Mac address just fine.

Any ideas.