What happened?

[Bill Colisch]

I frequently use my T2 with the Oregon RTN & when it works, it works great! IDK what happened, but now it wants to get the coordinate system from the receiver & "wait for CS data from RTCM3 corrections" message pops up. If I cancel, it seems to be working fine, gets fixed solutions on 3 or 4 engines, but WILL NOT record any epochs!
Am I the only one with this issue? Can anyone point me in the right direction?
Thanks for your time,
Bill

 

[Matt Sibole]

Bill are you using JMT?

 

[Bill Colisch]

Yes Matt I am using JMT

 

[Bill Colisch]

Here is a screenshot, appears to have a good position but will NOT record any epochs.
Any help is appreciated

 

[Matt Sibole]

I have seen a couple of different things cause that. If correct for tilts is turned on and it is not calibrated it will do that. I’ve seen it happen if you try and recall a different type of collection profile. I’ve seen it if I had a coordinate system problem as well.

 

[Bill Colisch]

Matt, thank you for your reply.
I don't think that I'm correcting for tilts (where do you check for this?), Compass & Levels are calibrated correctly
I've tried several coordinate systems, all of which worked fine before.
Collection profile: I have been playing with this since the issue arose. One thing that is different is that in the RTK Rover settings, I can't get it to accept any Ref. Frame - it is stuck on "Read from Receiver" (again this is only since the problem started).

 

[Matt Sibole]

Bill, Call me and I can do a teamviewer quick support session with you and see if I can resolve your issue. You will need to download the teamviewer quick support app on your android device.

 

[Bill Colisch]

Matt, Thank you for talking me through this.

 

[Matt Sibole]

Glad to be able to help!