T1M and HP435BT repeater

Wondering if there are any written instructions for configuring a repeater?
This would be for a T1M with a 1 watt radio and the 435 as a repeater.

Here is one:
https://support.javad.com/index.php?threads/using-the-t1m-and-35w-radio-as-repeater.2721/page-2


Here is the one I was working with, lots of info in there:
https://support.javad.com/index.php?threads/radio-firmware-update.2587/

I have not fully verified everything is correct. I am not happy with the performance that I am seeing after teh reconfigure, and I am not sure my repeater function is corking like it should. I just ran out of time to keep working on it. I will jump back in and make sure everything is correct when I have time.

Sean Joyce said:

Wondering if there are any written instructions for configuring a repeater?
This would be for a T1M with a 1 watt radio and the 435 as a repeater.

Click to expand...

Hey Sean, you can set the repeater up using the LS. Have radio on, then go to the UHF icon on the LS, then pick repeater, connect via bluetooth or usb.

Adam said:

Hey Sean, you can set the repeater up using the LS. Have radio on, then go to the UHF icon on the LS, then pick repeater, connect via bluetooth or usb.

Click to expand...

Thanks Adam.