Recent content by Richard Sunden

Hello Matt, I did a localization on a new project today. I did have a red filter Icon. The left most funnel was red. I taped on it, a screen with pages popped up I selected the proper page, the one my design points were in. And I got a list of points for selection. So I think I understand now...

Hello Matt, I don't remember. I'll check for that on the next project, which is Monday weather permitting. Thanks, Richard

Hello and Thanks in Advance, I 'm using a Triumph-LS. And I have a niggling little problem with bringing points into the localization page. I have not used the system for about two years. So the last big update is throwing me challenges. So, as long as I'm typing this up, I think any criticism...

This may be something simple that I just don't know: I started a project with points from a total station survey. There were some record points and measured point very near each other, these were imported into the LS for a new RTK project a few lots away from the total station project (TSP). I...

Hello Michael, your solution worked well. :)Thank you, Richard.

Hello Eugene, My user name and password does not work with that link. Richard

Hello, Did a normal RTK project using an LS and T2 base. Sending the base point to DPOS results in an "Adjustment error" statement. Can someone take a look and explain problem and the solution? The zip file is too large to upload here. How can we get around this? Thank you. Richard Sunden

Thank you Adam. I had success. Here is what I did ( Some particulars will vary for you. such as the PC's Device Managers name for your connection and the COM port #, your brand of RS232 to USB2.0 converter ): Updating HPT435BT Firmware (For Dummies) 1. Download, onto your PC, USB drivers...

Hello, In an effort to use the faster RTK rates (2Hz), I’m trying to update the firmware on my HPT435BT UHF modem. Tried connecting the HPT to an Android tablet Via Bluetooth, no success. ? Can someone explain the cable hook up to a tablet? We have both Android and iOS but they both have cables...

Hello Mikhail, The "Avg DMS W Long" file is in Degree Minutes Seconds. The format, which is typically used in many apps, is degrees then a decimal point, first two digits after the decimal are minutes the next two digits are the seconds and any additional digits are decimal seconds. So...

Hello Mikhail, Here are the point files

Thanks again Matt. I didn't think I needed to update software, so soon after purchase.

Hello, During a RTK session, using the LS as a rover,when I tap the UHF icon then > Configure, there is a "UHF Antenna" label above a box that has the word "Internal" and next to it is a check box. There is no External option. If I un-check "Internal" will I be on the External UHF antenna? I...

Hello Matt, Yes, I can use SPC. I think northings and eastings will import fine. Will try it asap. Thanks for the help.

Aloha everyone, I just purchased an LS, a Triumph 2 and the 35watt UHF radio. In three setups, to date, I have scored two successes, so pretty good so far. Now I ask for your help. I’ll post one question at a time, to keep answers organized. Import ? When I use data exchange to import (from a...