Nate The Surveyor
Well-Known Member
How often should we calibrate the LS?
How important is it to "keep it calibrated"?
What are the effects, of failing to do so?
Setting it on RIGHT and LEFT sides, require placing it on a ring, or lid, to keep it perpendicular to the surface it is on. Does it hurt, if you try to HOLD it steady, instead of using a ring, or lid, (something with a cavity, for the protrusions, on the side of the LS)
What about the Compass?
Same questions.
How often, How important, and how much potential error is introduced, by not doing it regularly?
I know some of this may be addressed in the manual... but the manual is not always current, and things do change, over time, including calibrations....
Another thing, is on the ACTION SETUP screen, under "ONLY RTK FIXED", there are two settings.
One is "Maximum Corrected Tilt Angle".
And the other is "Maximum Uncorrected Tilt Angle".
Can we now tilt the LS over at 30°, and take a shot? (This would be good for taking a center of creek shot, where we don't want to get our feet wet...) IF I am understanding it.
Talk to us, help us stay up, with development!
Thank you!
And, one more comment. It BLOWS my mind at the CONSISTENT VERIFIED shots I am able to take, and at the amount of development going into the LS program. "Thanks" does not seem to be an adequate expression of how happy I am with my LS!
Nate
How important is it to "keep it calibrated"?
What are the effects, of failing to do so?
Setting it on RIGHT and LEFT sides, require placing it on a ring, or lid, to keep it perpendicular to the surface it is on. Does it hurt, if you try to HOLD it steady, instead of using a ring, or lid, (something with a cavity, for the protrusions, on the side of the LS)
What about the Compass?
Same questions.
How often, How important, and how much potential error is introduced, by not doing it regularly?
I know some of this may be addressed in the manual... but the manual is not always current, and things do change, over time, including calibrations....
Another thing, is on the ACTION SETUP screen, under "ONLY RTK FIXED", there are two settings.
One is "Maximum Corrected Tilt Angle".
And the other is "Maximum Uncorrected Tilt Angle".
Can we now tilt the LS over at 30°, and take a shot? (This would be good for taking a center of creek shot, where we don't want to get our feet wet...) IF I am understanding it.
Talk to us, help us stay up, with development!
Thank you!
And, one more comment. It BLOWS my mind at the CONSISTENT VERIFIED shots I am able to take, and at the amount of development going into the LS program. "Thanks" does not seem to be an adequate expression of how happy I am with my LS!
Nate