Dpos glitch today

[Nate The Surveyor]

I'm on 2.0.208
I have been on it since about noon.
I have a slew of old files to dpos.
So, I was trying.
Here's what it does:
Go to points Screen
highlight base point.
Select that yellowish button, right below DPOS.
I have a DPOS solution, with the difference between Autonamous, and the FIXED coors one.
But, ALAS! I cannot change between "Known" and CORS Fixed.
The select button is broke.
Thank you

Nate

 

[Shawn Billings]

Nate,
It's not pretty, but it should work. Jot down the coordinates for the CORS solution, then press the M-Local button at the bottom right. It looks like two planes one above the other. Select "Manual" and type in the coordinates you jotted down. It should shift the base point to the CORS coordinates along with all related rover points.

 

[Nate The Surveyor]

For the ones I need now, I'll do that.
For the accumulated ones, that I don't have to have right now, I'll wait.
N

 

[Matt Johnson]

There is an easier way to get around this, select the PPK_BCP coordinate for one of the rover points and then you then choose "Yes for all" when prompted.

 

[Shawn Billings]

Matt's right. That's the way to go. I forgot about that approach.