RE: Jfield v.3.0.0.193
At the end of the hot day, shutting down the base, new warnings:
Why the need to repeat the warning about revision 3?
Lots to unpack:
1) The external radio behaved normally, so why the warning it is not paired?
2) Base Firmware complaint and to update to 3.6.12 or higher; however, my T2 is running 3.7.2
and for what it's worth I'm at this moment getting the latest unstable firmware for the Triumph-2 that's available; i.e., 3.7.3p1 Jun,21,2018.
3 and 4) I know my T2 is old, as I'm told several times in different places about this situation. But why keep harping on this? And why oh why, needs this message be repeated here in this list twice? The support of new features; is this limited to the only feature mentioned in Who Moved My Base? And for what it's worth, the radio going dark and staying dark is all that's really necessary to inform of mishap or mischief, and to avoid having to buy a replacement for the T2. Or are there other new features that my old T2 can't handle and that causes these continually nagging screens?
5) Data stream ordering error - what's up with this? What does this mean, and should I do something?
6) Can't read Base Point ID - Not sure what truth there is in this. The base file from the T2 to the LS was downloaded successfully in the field. It's integrity seems whole and intact. Comparing the file off of the T2 with the file off of the LS, both files are exactly the same size; i.e., 17,991,339 bytes.
7) Can't get files list - too vague to parse; pray tell more.
At the end of the hot day, shutting down the base, new warnings:
Why the need to repeat the warning about revision 3?
Lots to unpack:
1) The external radio behaved normally, so why the warning it is not paired?
2) Base Firmware complaint and to update to 3.6.12 or higher; however, my T2 is running 3.7.2
and for what it's worth I'm at this moment getting the latest unstable firmware for the Triumph-2 that's available; i.e., 3.7.3p1 Jun,21,2018.
3 and 4) I know my T2 is old, as I'm told several times in different places about this situation. But why keep harping on this? And why oh why, needs this message be repeated here in this list twice? The support of new features; is this limited to the only feature mentioned in Who Moved My Base? And for what it's worth, the radio going dark and staying dark is all that's really necessary to inform of mishap or mischief, and to avoid having to buy a replacement for the T2. Or are there other new features that my old T2 can't handle and that causes these continually nagging screens?
5) Data stream ordering error - what's up with this? What does this mean, and should I do something?
6) Can't read Base Point ID - Not sure what truth there is in this. The base file from the T2 to the LS was downloaded successfully in the field. It's integrity seems whole and intact. Comparing the file off of the T2 with the file off of the LS, both files are exactly the same size; i.e., 17,991,339 bytes.
7) Can't get files list - too vague to parse; pray tell more.