How Do I Adjust Base Position?

[Jim Frame]

To do this go to Points and choose a point surveyed from that Base position. Click the edit button

When I go to the Points screen, I see this:

Which one is the Edit button?

 

[Matt Johnson]

The second button from the left below "Point".

 

[Kelly Bellis]

 

[Jim Campi]

I checked mine again and it is set to 0000 for the pin. I misspoke. You have to have a pin.

I don't see any way possible for you to have rover points that are six feet off and a base point that is 50 miles off. Can you post a screen capture of the base rover statistics screen from one of your surveyed points? Go to Points>[highlight a point]>Press Edit button (pencil)>Press middle left button (shows epoch count) and the screen should show the base rover statistics screen that will show your base station coordinates, along with many statistics related to your surveyed points. It would answer a lot of questions.

Hi Shawn,

See enclosed...slightly over 79 thousand feet. I believe the project shown at the bottom of the screen shot is the actual location. The project name doesn't match the file name where the points are stored.

 

[Jim Campi]

See the enclosed. The magenta line is the surveyed fence. The blue line is the actual fence location...

 

[Shawn Billings]

Hi Shawn,

See enclosed...slightly over 79 thousand feet. I believe the project shown at the bottom of the screen shot is the actual location. The project name doesn't match the file name where the points are stored.

Does the base position on this screen match the base position of the actual base?

 

[Jim Campi]

Does the base position on this screen match the base position of the actual base?

Hi Shawn,

The rover and base were set-up on the same site. The total area surveyed was about 1/4 acre.

 

[Jim Frame]

View attachment 934

Got it. I had tried that one before, but got confused by Matt's direction to press the "button containing the Antenna Height" -- that button looked more like an information box to me than a button.

 

[Matt Johnson]

Yes I should have probably classified it as a information box rather than a button.

 

[Kelly Bellis]

Yes I have already planned on including it in the Quick Start Guide that I am writing. My goal is to finish it by next Monday.

No worries; just curious - How's that coming?