Jim Campi
Active Member
Gentlemen,
I am experiencing a significant problem.
I have the HPT401BT (1 Watt external UHF) radio that transmits corrections from the Triumph 2 to the Triumph LS.
Yesterday I came up with the brilliant idea to update the radio's firmware. I connected the RS232 serial cable between the radio and my PC. My radio had 3.2 Rev 4 B2 and the most current firmware is version 3.2 Rev 4 B17.
I ran ModemVU in admin mode, connected to the radio and attempted to update the firmware through the tools tab. I received an error indicating "invalid firmware downloaded then "please repeat download FW".
Today I attempted to survey a small site. The T2 connected to via BT however; no UHF connection.
This afternoon I tried to reinstall the firmware. After several attempts it worked without an error. I tried to setup again for a survey and no UHF corrections. Selecting the UHF connection box on the setup page results in a signigicant delay and a dialog box indicating "Identification of radio, please wait". After several minutes another dialog askds me select the radio from the list. After selecting, the processes starts over. The radio never connects.
Does anyone have any idea how to resolve this problem? I have resent the base set up and cleared NVRAM on T2.
Any help will be greatly appreciated. I'm adrift at sea...
I am experiencing a significant problem.
I have the HPT401BT (1 Watt external UHF) radio that transmits corrections from the Triumph 2 to the Triumph LS.
Yesterday I came up with the brilliant idea to update the radio's firmware. I connected the RS232 serial cable between the radio and my PC. My radio had 3.2 Rev 4 B2 and the most current firmware is version 3.2 Rev 4 B17.
I ran ModemVU in admin mode, connected to the radio and attempted to update the firmware through the tools tab. I received an error indicating "invalid firmware downloaded then "please repeat download FW".
Today I attempted to survey a small site. The T2 connected to via BT however; no UHF connection.
This afternoon I tried to reinstall the firmware. After several attempts it worked without an error. I tried to setup again for a survey and no UHF corrections. Selecting the UHF connection box on the setup page results in a signigicant delay and a dialog box indicating "Identification of radio, please wait". After several minutes another dialog askds me select the radio from the list. After selecting, the processes starts over. The radio never connects.
Does anyone have any idea how to resolve this problem? I have resent the base set up and cleared NVRAM on T2.
Any help will be greatly appreciated. I'm adrift at sea...