I have been getting some odd conduct out of my LS

Nate The Surveyor

Well-Known Member
Lights on the front, (battery) are staying on. Either red, or green. Even when off.
Also, the Popcorn noise, as the buckets fill, is intermittent.

What do you think?

N
 

Shawn Billings

Shawn Billings
5PLS
Is the LS plugged in to anything when you power it off? If the USB is plugged in to a pc, the LS doesn't power down fully.

I don't know exactly what you mean by intermittent, but interruptions in the incoming corrections will cause the LS to wait until corrections are received again. Sometimes the interruption can be very short. IN these interruptions, there's no epoch solved so no sound.
 

Nate The Surveyor

Well-Known Member
Nothing plugged in to it. And, the dots were populating the screen, just no sound.
I sort of think of re-booting it. I have been meddling a bit with it. Long term relationship is planned, so I want to learn everything I can.
N
 

Nate The Surveyor

Well-Known Member
Green lights were on all night. The two lower ones. The ones BELOW the ACTION button on the left, and below the HOUSE button on the right. Is this normal conduct? Also, yesterday, all noises stopped, ie, when pushing buttons on the face, it stopped clicking.
 

Nate The Surveyor

Well-Known Member
IMG_2730.JPG This is what it looked like, after being shut down all night. Is this normal?
 

Shawn Billings

Shawn Billings
5PLS
I'll call you when I get to the office, Nate. If you did the full power shutdown, holding the power button for 15 seconds, the next step is to do what Sean recommended. Forced update of power board firmware.
 
Top