J-Field 3.0.0.212 and Linux 4.4.150.1

[Michael Stazhkov]

J-Field 3.0.0.212:
- added: insecure mode for TCP server
- improved: work with standalone points in DPOS
- fixed: AutoCAD export failed when "Layers from Codes" enabled and codes contain quote(") symbol.
- fixed: showing of incoming corrections information when there is no position
- fixed: crash on PDF export
- fixed: SIM slot selection on the 4G/LTE screen
- fixed: cleaning of oldest restore points
- fixed: occasional hangup on exit
- fixed: occasional hangup on WiFi networks screen

Triumph-LS Linux OS 4.4.150.001:
- fixed multi-touch mode of touch screen driver

 

[Ralph Pendergraph]

I have been having consistent issues with my TCP use - I am downloading these updates now. LS either locks up or looses connection with the T1M base and the profiles go away. Reboot and when I reconnect with the base I have been losing static data for the previous points. I also notice that there have been times where the epochs are ticking away but the timer stays stuck, like they may be out of sync? Linux is working quite well, if we can get these things going....

Keep up the good work Michael and Adam P.

 

[Matt Johnson]

Some changes have been made in the current Test version of J-Field to attempt to resolve the issue with the profiles being lost when J-Field locks up. They are not in this version yet.

 

[Ralph Pendergraph]

Thanks Matt. Adam mentioned that this issue was being addressed. I will try the test version(our secret).

 

[Ralph Pendergraph]

A quick report back after my first time out since Adam assisted me in getting back up and running with the test version mentioned above(I think). Open sky on an as-built with all precise topo shots, so no boundary action group or resultant ppk to report. Not sure if that makes a difference with lockups or issues. Over 300 shots and it worked great with TCP. The LS locked up once towards the last few stake shots but - rebooted and went right back to work on TCP, no profile issues.