Glen Yasharian
Member
OK, it's connected.
Do you use System Based or All the Best?Until the setting is hardcoded, we should also discuss the Maximum Signals and Maximum Signals Core 1 on the Triumph-LS. For the Standard LS (which this thread is for), I would set the Maximum Signals to 38 and the Maximum Signals Core 1 to 25. This limits how many signals are used by the processor. Too many signals will bog it down and you will see "No Data" frequently even though communications are good from the base. If you continue to see "No Data" interruptions, continue to dial back Maximum Signals Core 1 by 1 until the "No Data" interruptions become rare. Hopefully soon this will be hard coded and no longer necessary for customers to adjust.
The setting is accessed by long pressing the "Auto Setup Engines" button on the Engines screen accessed from the Action screen.
In prerelease,tap the engine box, then long hold on the auto setup icon. You will see the option there.James, I have not come up with a way to determine if the LS is using System Based or All the Best.
Conventional should be used. The one displayed is the active selection.What about independent vs conventional tracking? Which should I be using? Is the one displayed the one it's using, or the one you want to switch to?
There is no 6 engine multi-constellation firmware. There is a 2 and 4 engine multi-constellation firmware. I use the 4 engine and use 38 and 33.