Position Computation Mode

Jim Campi

Active Member
#1
I was reviewing the log files on my T2 in NetView and noticed the Position Computation Mode is set to "wd"

wd is second to lowest in terms of accuracy and computes wide area code differential mode using SBAS corrections.

Shouldn't this be set to pd - carrier phase differential (RTK) with fixed ambiguites.

I have note made any changes to the parameters, by the way...
 

Matt Johnson

Well-Known Member
5PLS
#2
It is set to “wd” so a WAAS code float solution will be available when starting the base. This will be more accurate than a standalone solution. Also if the T2 is being used as a base it will not have a RTK solution.