Say hello to my little friend...

David M. Simolo

Well-Known Member
I needed it, the LS and the J-tip found it. Another game changer from Javad.

20170530_114427 compressed.jpg
 

John Evers

Well-Known Member
5PLS
David,

I am on a job now with 143 iron pins found so far. The J-Tip has been awesome for me.

I was out with another local surveyor on this same job last Saturday, and he carried his classic Schoenstedt. There were signals that his detector did not really give a definite reading on, that the J-Tip did. There was also a railroad spike 6 inch deep in the road that the J-Tip missed, and his Schoenstedt did find. When I put the J-Tip over his spot, I only had a 1.8 positive reading, which did drop back to zero when I moved away. When the spike was exposed, the J-Tip reading was 11 while in contact with the spike.

I am also getting good at judging depths before we dig in the road. I am usually within an inch.
 

John Evers

Well-Known Member
5PLS
Why do you suppose it struggled with the rr spk?

User error....., and a very weak field from the railroad spike. I had my JTip setting of "No Sounds Below" set to 1.8.

I was back today, and was using a setting of "No Sounds Below" set to 0.5. I had no problem detecting it very clearly. In fact...better than the Schoenstedt.

I think I have settled on a new "No Sounds Below" value!
 
Top